Pegelwandler

Level converter Function and use of a level converter What is a level converter and what is its purpose? Where is it used and are there alternatives in some situations? All this is explained in the following worksheet.

By |2022-04-20T11:00:46+00:00June 21st, 2020|Elektronik, Theorie, Tutorials|0 Comments

Spannungsteiler

Voltage divider Function and use of a voltage divider What is a voltage divider and where is it used? The following worksheet explains the properties of a voltage divider, which can be used in your own circuits, and how the necessary values for this can be determined. [...]

By |2022-04-20T09:27:28+00:00June 21st, 2020|Elektronik, Theorie, Tutorials|0 Comments

Ventilator

Ventilator Assignment Use the Micro Bit and the Inventor's Kit to build a fan circuit. This circuit serves as radio receiver, and a second Micro Bit as radio transmitter. If the button at the receiver is pressed, the fan of the receiver circuit is switched on. Additionally, the follow-up time [...]

By |2022-05-18T10:50:11+00:00June 21st, 2020|Elektronik, Inventors Kit, Tutorials|0 Comments

LED dimming

LED dimming Assignment Use the Micro Bit and the Inventor's Kit to program a LED with brightness adjustment via the potentiometer. Use the Analog Digital Converter (ADC) at the pin of the potentiometer and Pulse Width Modulation (PWM) for the LED. If you need any help, take a look into [...]

By |2022-05-18T09:57:49+00:00June 21st, 2020|Elektronik, Inventors Kit, Tutorials|0 Comments

Lichtsensor

Light sensor Assignment Use the Micro Bit and the Inventor's Kit to program a streetlamp. If the ambient brightness drops below a specific value, the LED starts flashing. If you need any help, take a look into the worksheet or watch the tutorials. Blockcode [...]

By |2022-05-18T06:49:44+00:00June 21st, 2020|Elektronik, Inventors Kit, Tutorials|0 Comments

blinkende LED

Flashing LED Assignment Use the Micro Bit and the Inventor's Kit to program a LED flashing once per second. To do so, use the pinboard, a green LED, a suitable series resistor and 2 jumper cables. If you need any help, take a look into the worksheet or follow the [...]

By |2022-04-20T12:44:28+00:00June 21st, 2020|Elektronik, Inventors Kit, Tutorials|0 Comments

Ampelschaltung

Traffic light circuit Assignment Use the Micro Bit and the Inventor's Kit to program an event-controlled traffic light. This means, the traffic light usually always "remains" green for cars. If the button is pressed, the traffic light flashes 4x green and is then switched from yellow to red. After a [...]

By |2022-04-21T09:56:00+00:00June 21st, 2020|Elektronik, Inventors Kit, Tutorials|0 Comments
Go to Top